Description
Rechargeable Combat Stock FEATURES:
Designed for a rear wired Airsoft Rifle
6 position retractable stock
Mil Spec buffer tube compatible
Sling attachment point
Accepts NiMH 8.4v or 9.6v Nunchuck batteries
Tamiya style battery connection
Protection overcharging board
Blade Fuse – 30 amp
Battery not included
WARNING: NOT Compatible with Li Po or Li Fe Batteries
R.C.S. Rechargeable Combat Stock Installation
Pre-Install Preparation
Remove the OEM stock.
Remove the buffer tube mounting screw in bottom of the tube.
Remove buffer tube.
Disconnect the quick connector wires from the wire leads coming from the back of the rifle. R.C.S. Installation
Install the R.C.S. stock body onto the buffer tube.
Using a small flat screwdriver, lift the short spring pin.
Slide the R.C.S. stock body all the way onto the buffer tube.
Remove the three screws from the butt plate.
Remove the butt plate and the back cap that holds the PCB/Fuse holder.
Feed the quick connector wires through the buffer tube.
Connect the quick connector wires to the wire leads coming from the back of the rifle.
Reinstall the buffer tube with the R.C.S. stock body mounted.
Carefully reinstall the buffer tube mounting screw.
Battery Installation
Place the 9.6v or 8.4v NiMH butterfly type battery into the stock’s back slots on either side of the buffer tube.
Connect the mini Tamiya connector from the battery to the R.C.S. mini Tamiya connector.
Fully retract the R.C.S. stock.
Gently push the excess wire into the buffer tube. Make sure the Tamiya connection stays on top and goes in last.
Insert the back cap that holds the PCB/Fuse holder.
Extend and retract the R.C.S. to ensure free movement.
Mount the butt plate and reinstall the three screws.
R.C.S. installation is complete. The R.C.S. and is now ready to be charged using the charging harness or the Valken Stock Doc.
Charging Options
Valken Stock Doc
The most simple option is to use the Valken Stock Doc, gently drop the R.C.S. stock into the Stock Doc.
Smart Charger
Connect the included charging harness into the mini tamiya connector of the smart charger. Plug the charging harness into the rear of the R.C.S. Stock.
Video Installation airsoft.valken.com/rcs
Compatibility
Mil Spec Buffer Tube
G&G
Top Tech
VFC
G&P
ARES Proline
JG
SRC Gen.2/Gen.3
KWA/KSC
CA
Connection-Rear Wired AEG
G&G
Top Tech
With Slight Modification or Adaptor
VFC
G&P
ARES Proline
JG
SRC Gen.2/Gen.3
KWA/KSC
CA
Safety
Do not alter or modify the R.C.S. unless you are a certified technician, modifications can affect performance and damage the R.C.S.
Do not leave charging cycle unattended
DO NOT use LiPo or LiFe batteries in the R.C.S. it is for use with only NiMh 8.4v and 9.6v batteries
Explore more from our collection.
Reviews
There are no reviews yet.